Tuesday, December 9, 2014

Camera Lens Groom's Cake

We have mentioned in previous posts about finding designs that will meet the needs of you client's vision and budget. This groom wanted a Nikon camera cake but that's a little involved. This camera lens cake was a cool compromise. It's still a cool cake but was six 9" round cakes and required only a tiny bit of carving. To be accurate I should have carved in at the bottom to about an 8" round but I didn't want to lose any structural integrity. This was a soft cake and it doesn't hold up well to a bunch of carving.

We used Fondarific in black for the sides. We rolled out the band and cut the right height. We then embossed a pattern to mimic the real thing and chilled it for a few minutes so the design didn't stretch out when applying it to the sides. Next we just added some bands with other textures on the top and bottom. This also helped give an illusion of a carved cake. Next we added a circle on top to be the "lens". We added some bands around the top lip and side of the lens. That piece was cut to go above the lens and give the appearance of a inset lens. I hope that makes sense, I know it sounds a little crazy. Just make sure all your bands line up the same in the back.

Chad printed the graphics out on edible image paper. My mistake on this cake was a common one. Anytime you apply an edible image, it needs to go onto a white or very light background or the color bleeds through the image. If you can't add a small piece of white fondant behind the graphic, then use a fresh page of edible image as a white background. I didn't and the black color came through. I know better! Bad cake decorator!

1 comment:

Thanks for visiting the blog! I look forward to reading your comments!

Note: Only a member of this blog may post a comment.

ShareThis

Related Posts with Thumbnails