Cornhole Groom's Cake Photo Tutorial

Whether you call it cornhole, bean bag toss, or Baggo, people are playing this toss game everywhere - tailgate parties,family picnics, and even weddings.  So I guess when a client asked for one as a groom's cake I shouldn't have been surprised.  And since it's basically a sheet cake on an incline, they're actually pretty easy to make.

 

We'll start with a board to fit our cake (a 12x18), a larger board for the cake to rest on (17 1/2 x 25 1/2) and a small foam wedge to give us our height (8 1/4 x 9 - 2" high).  Start by using the 12x18 cake board to determine where you want your cake to land on the larger board.  I have marked mine on the image above with some temporary masking tape.

 

Dry fit all your pieces together to make sure they all fit the way you want.  Make sure to mark the placement of your styrofoam wedge.  It should hold the top board flush against the styrofoam, while being centered across the board.  Once we start securing things down there's no going back!!

 

Normally, styrofoam and hot glue don't mix very well, but I didn't have any extra "gluing chocolate"so I put some down on the board and gave it a couple of seconds to cool down before I plonked down the styrofoam wedge.  Let it dry and make sure the wedge is very secure on that bottom board.

We don't want that old foam wedge to be seen, so the next step is to cut some black modeling chocolate and put it on all 3 sides using piping gel.  We now have the base to place our cake on!

OK, so now the cake is on our 12x18 board and has been iced smooth.  Place it on the board using your masking tape guides and make sure everything is sitting nice and flush.  Once you like what you see, put a couple dowels through the cake, board, styrofoam,  and bottom board.  This will add stability and keep your cake firmly in place.

Now we just simply finish decorating the cake, and that part can be as simple or complex as you like.  I put modeling chocolate (MC) panels on all sides of the cake, but I put a thin layer of black MC on top.  then I covered that with a regular piece of modeling chocolate, making sure my top extended over the edge of the sides, just for a realistic effect.  Use a cookie cutter to gingerly cut out your bean bag hole, and the black from underneath will look just like a hole.  Now just decorate with your particular theme or team until you've got it just the way you want it.  Don't forget to make a bean bag!!