Safari Animal Birthday Cake

We create so few birthday cakes these days that when we get to make one, we tend to go a little overboard.   The cake is really a basic design to be a backdrop for the real stars, the animals.  I added a small piece of styrofoam to lift the top tier so I could have a place to hang the vines.   It really is best for the sake of stability.

We marbled a little fondant for the waterfall  and disguised the source with fondant rocks.  As a side note, if you want some AWESOME looking candy rocks and boulders that are solid chocolate covered in a candy she'll, check out Nuts.com.  I love these people, their almond flour and their cute packaging.
 

There are a million animal tutorials out there, so I can't add much new in that department.   The most important thing to remember is to add tylose to your fondant and let it sit up a while. This step will make your animals not  be droopy or melty looking.   Another tip is to add a little "makeup" to your animals. A little touch of blush will make your animals "come to life"!  Also, if you get the basic way of making an animal, you can search Etsy for an "elephant" and take some inspiration from a greeting card, stuffed animal or most anything.  If you are selling a cake with animals, you should allow about two hours to make each animal.  I'm just saying, don't start the animals at 8pm the night before the cake is due.  Happy animal making!

New Realistic Cake Guitar Strings - Mini Tutorial

Remember the guitar cake we did a few months ago?  Sometimes the best ideas hit you when you're in the weeds.  We were SO running out of time to finish this cake and I was going to do something that would not have been so pretty.  I'll give you the short version, which is still kinda long!  Chad came up with a great idea to use bamboo skewers to hold the strings.   Read on for a mini tutorial on how we did this.

 

 We drilled the tiniest of holes in the skewer and tied fishing line in a double knot so it wouldn't slip through.  We measured all the skewers to just fit above the fondant after it was tapped into the gator board/drum below.  Next time I would do a better job of cutting these more uniformly.

Once you have all the skewers cut and your fishing line attached (leave it long on the "neck" end) start hammering them into place at the bottom of the guitar.  If you do them once at a time they'll be easier to manage.  An assistant will help hold the loose strings off the cake.

I did my best to hide the skewers, but I was on a tight timeline but I would conceal them better next time. probably using fondant or food markers.

On the neck end, each of your skewers will be a different height, so you'll need to hammer in and measure each skewer individually.  This will also be the time you measure your fishing line and cut it just a bit longer than you need.  Go ahead and drill your skewer hole and tie your fishing line in a knot on the skewer.

Here's where the magic all comes together.  Start pushing the skewer back into it's hole.  If you notice the string is going to be too long, give the skewer a turn or two to tighten the string.  As it goes into the cake, the string will tighten.  You won't be able to tune it to the correct key, but it will hold tight enough to look really good.  Using a thick modeling chocolate bar at the base of the neck will give the strings something to bite into and help keep them in place. We then put some fondant tuning pegs over the holes to hide the skewers.

We used real guitar string on the banjo, but know that we have figured this out, it will be our go to method.  I will say that when we moved the cake the strings got looser because the flex of the very long cake board but then got tight again as soon as we laid it on the display table.  I'm lucky the saggy, traveling strings didn't mess up my paint.

Hope this helps - if you have any questions, feel free to  lave us a comment.

Equestrian Bat Mitzvah Cake

We've been lucky to make some fun Bat-Mitzvah cakes lately!  They are way more fun than birthday cakes because they are MORE!  They are bigger, sparkly and more sophisticated than most birthday cakes.  Our birthday girl is a fantastic equestrian and took her favorite theme into her party.  I wish we had picture of the fantastic barn they decorated and used for the party.  It made me want to be the birthday girl!
  
It's hard to tell but each tier is an oval shaped tier. We did not taper the tiers inward but we did angle the tops of each.  The cake was buttercream with modeling chocolate cut outs.  We found the silhouettes off a background website and Chad converted them to use in the Cricut.  We printed out a couple of pages of edible images for the pennant flags.  The riding hat on top was hard only because I had to come up with something to go under it so that it wouldn't sit flat.  That was a customer request.  The pink, coral,blue and navy was very pretty in the barn and the cake looked great there.  Looking at it now, I would liked to have had more color on the cake as a whole, but I don't take liberties with the conditions of the contract. I know it's not always ideal, but I would hate to add stress to a family the day before an event.

That's when it's

great to have longtime customers that can trust you enough to change the design when needed. The blue ribbon, hat and riding crap were all made from fondant with a little tylose to firm things up.  I hope you can draw some inspiration from our little cake!

Valentine's Party

Happy (belated) Valentine's Day! We just had our third annual Valentines's party for our trivia team. It's a small group of super great people. It is a good time of the year for me to bake new things and have a good time trying new recipes. We make a dinner, appetizers and lots of desserts. The desserts included white chocolate pots de creme with strawberry compote, tiramisu, cheesecake balls, bourbon caramels, strawberry pavlovas, peanut butter fudge, and on and on.

The cutest idea by far was one I found on Bakerella's site!  I fell in love with these tiny cookies on tiny stands! Sqeeeeeee! By far those cookies, as well as the other cookies, took more time than everything else combined. I used the cookie and icing recipe she recommended and they were pretty good, but I'll keep looking for THE recipe. I hope you guys take some inspiration from these and make them for someone super special. My guests ended up taking the stands home and giving them to others to brighten their day (and hopefully never be eaten).

Worley Rustic Wedding

 

Barn weddings are everywhere!  If they are not as popular in your area, you are a little lucky.  Don't get me wrong, they are pretty in a rustic or fancy rustic (trademark pending) and make for nice pictures.  Most are not air conditioned, which means fondant icing is the best idea so that sawdust doesn't stick to the buttercream.  Some brides just won't do fondant, so here we have a buttercream cake in a barn. Pretty!  We added the little gold dots with a paint brush that I cut to be a flat circle. I know it's super hard to tell, but the bottom tier had lines scored in it, a little like a tree pattern.  The pendent banners were purchased on Etsy and the flowers were real.  The result was rustic, pretty and tasty!  

Pleated Fondant Wedding Cake

We have done a few cakes like this, but I do have a little advice and "new thoughts" on the technique of the pleated fondant.  I've noticed on some of the FB cake groups I'm in that a lot of people ask how to do this look.  Many people are doing a version of it by cutting several angled pieces of fondant and layering them on top of each other.  It's a much flatter look.   There is nothing wrong with that version, but it's not the same as trying to make the fondant look like pleated fabric.  If you are brought a picture like this cake but don't make it the same way, out of one piece of fondant, the look will be very different.  BEFORE you sign a contract saying you will do it , try it on a cake dummy so that you can prove to the bride and yourself that you can get the same look.   If you are a customer and you aren't SURE your baker can do something, offer to pay for a small trial run, like a top tier size. 

This cake was made using 3" styrofoam  cake dummies in between the tiers.  I painted all the flowers with an airbrush ahead of arranging them.  The flowers we stuck in if they had wire, but most were "glued" in place with royal icing.  My advice here is use as many different size flowers as you can so that you don't have blank spaces.  I  have been known to make a few roses petals and squeeze them in when the are soft so it looks very full.  We also airbrushed the dickens out of this cake when it was all stacked and ready to go!  My bride wanted a pearl finish so she got it!

Anytime you have a tier of cake floating above flowers you have to deal with hiding the edges of the cake boards.  For me, ribbon is the answer because it is not heavy and you can pull it tight so it doesn't sag.  Buttercream borders can fall off due to gravity, as can fondant pearl borders if they are large.  Have you ever noticed that when the bakers in Europe make this type of cake, they still have a larger cake board under each tier?  So a 6" cake would have an 8" cake board, then a 10" cake and 12" board, etc.   I don't like the look myself, but it sure would be easier! 

                                                  

*I owe you a close up picture.  I accidently deleted it :(

3D Acoustic Guitar Groom's Cake

     We have made three musical instruments to date.  A simple acoustic guitar, a fantastic banjo, and this cake.  The bride was limited on her budget, so to cut costs/labor we didn't make any type of armature for this cake.  The neck is entirely made out of cereal treats and then "faked out" by using black fondant to represent the underside of the neck.  I like the look of it, especially since I didn't have to do a bunch of woodworking that isn't much fun to me.  The sides of the guitar are buttercream.  The top and neck are all covered in modeling chocolate.

     For the cake board, I did use a power tool and cut 1" thick Gatorboard with a rotozip tool.  Gatorboard is a lot like foamboard, but instead of paper on the outside, it's this really hard surface.  You can't cut it with a box cutter.  I used to use it all the time when I was in visual merchandising.  Look at the letters in a department store and you will see this material.   It was not my most brilliant plan :(  It was messy, bumpy, and not a good structural idea.  I was moving the cake from the cooler to the table and hit the neck cake board on the side of the table.  It was heavier than I expected and I was just trying to hurry too much.  My accident caused the neck of the cake board to break but not come off.  At this point, the cake was carved and iced smooth so moving it to another board would have turned it into a pile of crumbs.  For a solution, we cut a 1/4" piece of plywood about the size of the cake and glued it underneath to brace the original cake board.  It gave me a lot more structural integrity. 

For the strings, well my husband is a damn genius!  We were so running out of time to finish this cake and I was going to do something that would not have been so pretty.  I'll give you the short version and we can follow it up with a little tutorial.  Since the Gatorboard cake board we could stab wooden skewers into it and they would hold in tight.  Chad drilled the tiniest of holes in the skewer and tied fishing line in a knot.  Then with both of us holding it so as to not damage my fancy paint job (heaven forbid we try this before the cake is otherwise done-silly baker).  We used a tall piece of modeling chocolate at the top of the neck to hold the string up so they didn't lay flat on the neck and it held them in the proper order without wiggling around.   We then put the line through another tiny hole in a wooden skewer and hammered it into the cake and board.  The tension was good and the line didn't move.  We then put some trim pieces over the top skewer to hide the skewers. We ran out of time to figure out camouflage for the bottom skewers.  We used real guitar string on the banjo, but know that we have figured this out, it will be our go to method.  I will say that when we moved the cake the strings got looser because the flex of the very long cake board but then got tight again as soon as we laid it on the display table.  I'm lucky the saggy, traveling strings didn't mess up my paint. 

 

Lastly, my lesson of the day is to paint with colored cocoa butter onto modeling chocolate.  Chef Rubber (http://www.shopchefrubber.com/Cocoa-Butter-Painting-Kit/) has a great kit that will last for a while.  ANYTIME I use an edible marker on modeling chocolate, once the cake comes out of the fridge and has a little condensation, all the details run like Alice Coopers mascara!  Cocoa butter painting takes a little practice, which is what I'm still doing, but once it firms up, the details won't move or get smudged by anything.  I hope you take something helpful away from this because one day you may have to figure out guitar strings on a cake!

Facebook Rant over Illegal Bakers

Graphic via KeepCalm-o-matic

I joined a few Facebook "yard sale" groups in my area.  It seems like every other day someone asks for recommendations for a cake person.  One lady just said she "didn't want to pay as much as her wedding dress costs".  All of these people start stepping up and throwing names out there.  Maybe my hormones are crazy today, but I just had to say something.  It could make me very sorry, but I hope the ones that are running an illegal operation don't take it as bashing.  The people with nasty kitchens are the ones that will be upset.  Please read my post and tell me what you think...
 
" My wedding cake business is Cup a Dee Cakes LLC.  I don't make birthday cakes and start my prices at a $250 minimum so I don't post here looking for sales.  I have a business license, health department inspection every 6 months, Serve Safe certification, insurance, contracts and glowing reviews from brides as well as vendors.  I also pay sales tax, business tax, licenses, and advertising.  We spent about $40,000 building a legal kitchen onto our home.  All those things add to a businesses overhead.  I start my round tiered cakes at $3.75/serving for an all butter-NO Crisco buttercream.  You will get what you pay for in all things.  I have not tried ANYONE'S cake that posts on this board or checked to see if they are "legal".  It's not my place.  This is not against them personally, I'm just trying to give some advice.  A contract is there to protect both parties involved.  Often if a cake is great in taste and quality, they would/could charge more.  Cheap cakes cost less because the bakers don't have the same overhead, skill set, quality of ingredients or they haven't figured out how to charge in order to make a living.

I see cakes services on this board a lot.  I have respect for anyone trying to make a living.  I have not tasted or experienced anyone's cake that they have advertised in this group. Unlike, say handmade jewelry, cake is edible and can make someone ill or ruin a huge event when it falls over. I think it is not out of line to ask if a baker has any kind of license or where they bake and decorate their cakes.  Do they have pets or children in the workplace? If you haven't seen their kitchen, how could you serve the cake to your guests?  Cake can still give someone food poisoning.  If you are looking for a cheap  wedding cake, you may be better to get one from a grocery store or a baker that has a cottage food license.  That way, you can still have food safety standards and a contract. A birthday cake isn't nearly as big of a deal since it's less people and a smaller party.  Check out cakewrecks.com for some examples of how things could go wrong.  I really do wish the best to all those trying to make a living at making cakes.  I hope all cake customers get the cake they have been dreaming of for their special day."

The good thing is that I feel better and got to turn my rant into a blog post :)

Minnie Mouse Cake for Icing Smiles

We are a volunteer with the Icing Smiles organization. We just had the opportunity to make a 6th birthday cake for a sweet birthday girl. The family wasn't picky, they just wanted Minnie Mouse on the cake. We aren't exactly Angels when it comes to following copyright law, but we don't dare to mess with Disney. But since this cake was a donation with no charge to the family, we are allowed to recreate copyrighted characters. We checked with the Icing Smiles folks and their lawyers said it was okay to make these cakes.

 

The Minnie Mouse was the most time consuming part of the cake. I'm not proud to say it took me about eight hours. I don't make figures very well, so I'm slow and sometimes I have to "redo". This Minnie had three sets of ears and two bows. I used Choco-pan modeling chocolate just for the face because it's great for sculpting. I'm sorry, but it's too soft for other things that I use homemade modeling chocolate. I'm happy that she looks like Minnie and not a generic version, but I think I could do better next time. I also forgot to put on her blush.

I found a cool color palette on Pinterest and that was it! NEON AND SNOW LEOPARD. The pink was "sexy pink" from Elite. For both of the greens, I used mostly electric yellow with a touch of electric green for the day glow color and a little more green for the darker shade. Use a lot of yellow!

The 3-D hearts were made from the same concoction that makes cake pops, which in this case is a cooked chocolate cake layer, melted chocolate and a little buttercream. I chilled it, formed the hearts and then popped them in the freezer for about and hour. Once firm, I smeared a little piping gel and covered in fondant. All of the gathering and ugly part of the fondant was in the back.

I really enjoyed making this sweet cake and I hope it helped make the birthday girl's day more special!

Border Knot Wedding Cake

We were asked by a very good friend to make a cake for his employee. The company was buying it and gifting it to the couple.  Wow! That's a nice gift!  They were going for an Art Deco theme and wanted to carry that through with the cake.   The knot fabric effect was the most challenging part of the whole thing.  I've even made a little video about it and posted that on our Instagram page.  I found it a little easier to work on a square cake dummy that was turned on it's side.  That way, the pieces were measured correctly and dry fit perfectly before we attached them. They would have stretched and deformed if we worked with them horizontally for the extended period of time that I needed.   The flower ball separator was styrofoam covered in fondant.  I didn't want to build a structure just for that tier so it was easier that way.

The etched lines and jewels on the top tier were kind of a nod to "The Caketress" and her designs.  The lines are easy to do as long as you use a tool that won't cut the fondant, so a dull wooden clay tool works great.  The jewels were done out of isomalt, which is sugar and that was a mistake.  They did a little bubbling or something due to the moisture of the refrigerator.  Next time I would mold them with melted chocolate and then paint silver as normal.  It takes a bunch of them so the time to apply them all was about two hours for that one area.

For the vertical stripes we just used a texture mat and embossed the fondant, then we cut them.  When doing any stripes and strips of fondant, it's better to chill the fondant a little before applying it so that it won't loose it's shape.  The flowers are basic, meaning we cut them, press in a flower veiner and let dry in a cup shaped form.  Once dry, we used a little royal icing and added a sugar pearl for more opulence.  We enjoyed getting to make a cake with lots of texture and jewels!

See our Flipagram video below!

Fabric knot effect with fondant.

A video posted by Jenniffer White (@cupadee) on Oct 10, 2014 at 10:43am PDT