Bottle Cap Cake Tutorial

A bottle cap is a really good place to start working with carved cake.  You don't have to use a pound cake, but if your cake is not firm then you need to use a buttercream that is all butter or ganache.  Those will firm up nicely and make the carving easy.   For this cake,  we baked three layers, a 14", 16" and 18".  I didn't carve much to get to this point.  I really just filled in with a lot of buttercream (as you can see below).  It's easier this way because you don't have all of the soft cut edges to deal with.

I've used a piece of cardboard that is covered on both sides with packing tape.  This will allow you to wipe it off a keep it from getting soaked with buttercream.  I just make a shape by folding a piece of paper in half and draw a J shape.  When you cut it, it should be a mirror of your J, therefore being even and identical on both sides.  Don't get the "caves" to close together.  The thin piece of cake that will separate them will be weaker the smaller you make it. You can spend hours figuring out the exact space in between each indention so they are all equally spaced or you can wing it and end up with a backside, as we see here.  Just remember where the back is so you don't accidently put it in the front. 

It's a little hard to see, but I've wrapped a piece of masking tape around my knife as a guide so I don't cut too deep. It's not going to stop you from cutting too deep, it's just there as a visual reference. Now this is the deepest you are going to cut only at the bottom layer and then taper up from there. You want the back wall to be straight-ish.

You have some room for boo boos here.  You are going to fill in with a coat of buttercream so if you cut too deep, fill it up with buttercream.  You are going to want to use a bag of buttercream and pipe some icing into these caves.  Your fingers are going to be the best tools here, but you can also cut a small piece of flexible material like stencil plastic.  Don't drive yourself too crazy filling these into be perfect.  Get a crumb coat on and chill.  Then add a second coat so that your fondant has a nice base to go onto.  Icing inside of the caves will take you longer than carving them out.  If you can, use some Elite  or Fondarific fondant for this project.  You need a long time work time to get the fondant into the caves and you need a lot of stretch.

Once you get your fondant applied, you can airbrush or dry brush as darker shade of the fondant inside of the caves to give the illusion of more shadow.  Create a template of your favorite brand of soda or beer.  Print two copies, one to cut up and one for spacing.  Use modeling chocolate and cut out your logo.  Arrange all of the cut pieces on top of a print out of the logo so the spacing is perfect.  Put Crisco on one side of a piece of wax paper and press it to the front (top) of the cut letters.  You should be able to transport the letters from the table onto the top of the bottle cap ensuring the spacing is perfect.   I like to use a wet brush a attach the pieces individually, but you could dampen your top side before you place the cut logo pieces on it.  cover the top of your cap.  Press the pieces down and slowly peal away the wax paper.  Poof!  Bottle cap!

Golden Inspiration Wedding Cake

Edible sequins are one of the new big trends in cake design, at least with Chattanooga wedding cakes  We shared one a few weeks ago that had "large" sequins but now we have one with tiny sequins.  I'm just going to say it, I used A LOT of gold! But it's SO pretty! We baked and iced a 6/8/10/12" combination in all buttercream.  We created the lines with a little pairing knife dipped in warm water every few minutes.  The borders were fondant and the sequins were colored quinns painted gold.

 

You can get a five pound container at Pfeil and  Holing.  Don't kid yourself, 5 pounds is a big container; it should last you a while!

We bought a bunch of these flowers to make the cake more economical for the bride.  As usual, my favorite flowers are the big pretty garden roses from Cal-Java.  They are SO big and pretty and they really popped against those gold sequins!  I hope you get a little bit of golden inspiration from this pretty cake!

Muppet Birthday Cake

We just love a cake where we get to "play"!  This sweet mom gave us lots of freedom for Henry's 2nd birthday.  I know it's nothing earth shattering new, but we do such few birthday cakes, that I really enjoy the ones we do make.  My advice for this type of cake is to make the character first because you will have to redo it a couple of times.  Don't get discouraged if you can't make your famous character the first time.  It's very hard to make these guys look right.  Haven't we all seen those great cake where the character is "off" just enough to look really bad.  If you get a toy for reference it will take a lot of guess work out of the project. You can even use a toy to make a mold if you would like. 

For the "candles" we just took a snake (rolled out long) of fondant and wrapped it around a lollipop stick that had a little sugar glue on it.   The flame was three different colors of fondant, dipped in a little edible glitter and secured on top of the candle with a little piece of wire going in the flame and white fondant.  We made the confetti by wrapping strips of fondant around a dowel and slid them off right onto the cake to keep them curly.  The oversized sprinkles are pieces of fondant as are the balloons.  I know that I should have used white wire instead of the sticks since they look so thick.  It was a late night.  The yellow dripping "icing" on the top tier is best done by covering an upside down cake pan with a piece of fondant (preferably Fondarific so it doesn't dry too fast)  and carve the drips.  Then take the piece off and place on your work table.  You can soften the edges with your finger so they don't have such a cut looking edge.  Place the fine tuned piece on top and adhere it down with a little water.  I hope you all try a fun character cake and heed my warning to allow for lots of time! 

Safari Animal Birthday Cake

We create so few birthday cakes these days that when we get to make one, we tend to go a little overboard.   The cake is really a basic design to be a backdrop for the real stars, the animals.  I added a small piece of styrofoam to lift the top tier so I could have a place to hang the vines.   It really is best for the sake of stability.

We marbled a little fondant for the waterfall  and disguised the source with fondant rocks.  As a side note, if you want some AWESOME looking candy rocks and boulders that are solid chocolate covered in a candy she'll, check out Nuts.com.  I love these people, their almond flour and their cute packaging.
 

There are a million animal tutorials out there, so I can't add much new in that department.   The most important thing to remember is to add tylose to your fondant and let it sit up a while. This step will make your animals not  be droopy or melty looking.   Another tip is to add a little "makeup" to your animals. A little touch of blush will make your animals "come to life"!  Also, if you get the basic way of making an animal, you can search Etsy for an "elephant" and take some inspiration from a greeting card, stuffed animal or most anything.  If you are selling a cake with animals, you should allow about two hours to make each animal.  I'm just saying, don't start the animals at 8pm the night before the cake is due.  Happy animal making!

Pleated Fondant Wedding Cake

We have done a few cakes like this, but I do have a little advice and "new thoughts" on the technique of the pleated fondant.  I've noticed on some of the FB cake groups I'm in that a lot of people ask how to do this look.  Many people are doing a version of it by cutting several angled pieces of fondant and layering them on top of each other.  It's a much flatter look.   There is nothing wrong with that version, but it's not the same as trying to make the fondant look like pleated fabric.  If you are brought a picture like this cake but don't make it the same way, out of one piece of fondant, the look will be very different.  BEFORE you sign a contract saying you will do it , try it on a cake dummy so that you can prove to the bride and yourself that you can get the same look.   If you are a customer and you aren't SURE your baker can do something, offer to pay for a small trial run, like a top tier size. 

This cake was made using 3" styrofoam  cake dummies in between the tiers.  I painted all the flowers with an airbrush ahead of arranging them.  The flowers we stuck in if they had wire, but most were "glued" in place with royal icing.  My advice here is use as many different size flowers as you can so that you don't have blank spaces.  I  have been known to make a few roses petals and squeeze them in when the are soft so it looks very full.  We also airbrushed the dickens out of this cake when it was all stacked and ready to go!  My bride wanted a pearl finish so she got it!

Anytime you have a tier of cake floating above flowers you have to deal with hiding the edges of the cake boards.  For me, ribbon is the answer because it is not heavy and you can pull it tight so it doesn't sag.  Buttercream borders can fall off due to gravity, as can fondant pearl borders if they are large.  Have you ever noticed that when the bakers in Europe make this type of cake, they still have a larger cake board under each tier?  So a 6" cake would have an 8" cake board, then a 10" cake and 12" board, etc.   I don't like the look myself, but it sure would be easier! 

                                                  

*I owe you a close up picture.  I accidently deleted it :(

Border Knot Wedding Cake

We were asked by a very good friend to make a cake for his employee. The company was buying it and gifting it to the couple.  Wow! That's a nice gift!  They were going for an Art Deco theme and wanted to carry that through with the cake.   The knot fabric effect was the most challenging part of the whole thing.  I've even made a little video about it and posted that on our Instagram page.  I found it a little easier to work on a square cake dummy that was turned on it's side.  That way, the pieces were measured correctly and dry fit perfectly before we attached them. They would have stretched and deformed if we worked with them horizontally for the extended period of time that I needed.   The flower ball separator was styrofoam covered in fondant.  I didn't want to build a structure just for that tier so it was easier that way.

The etched lines and jewels on the top tier were kind of a nod to "The Caketress" and her designs.  The lines are easy to do as long as you use a tool that won't cut the fondant, so a dull wooden clay tool works great.  The jewels were done out of isomalt, which is sugar and that was a mistake.  They did a little bubbling or something due to the moisture of the refrigerator.  Next time I would mold them with melted chocolate and then paint silver as normal.  It takes a bunch of them so the time to apply them all was about two hours for that one area.

For the vertical stripes we just used a texture mat and embossed the fondant, then we cut them.  When doing any stripes and strips of fondant, it's better to chill the fondant a little before applying it so that it won't loose it's shape.  The flowers are basic, meaning we cut them, press in a flower veiner and let dry in a cup shaped form.  Once dry, we used a little royal icing and added a sugar pearl for more opulence.  We enjoyed getting to make a cake with lots of texture and jewels!

See our Flipagram video below!

Fabric knot effect with fondant.

A video posted by Jenniffer White (@cupadee) on Oct 10, 2014 at 10:43am PDT

Monster Truck Birthday Cake

We were asked to make a cake for a vendor's grandson and we were given free reign on the design.  I love that, but sometimes it stresses me out!

Anything I want!?! Oh. I have to consider how
Much the I have left in the week? Well that happens with lots things doesn't it!

The final cake only had one tier that was all fondant and that was the tire.  The tan tiers are all buttercream and the "dirt" is graham cracker crumbs.  We striped the bag for the flames and used a leaf tip.  We cheated and used a chocolate mold for the truck and card stock for the flags.  We used part of our cake scraps (the hump we cut off to level the layer) to make a hill for the truck.  I like the way it came out and am glad it didn't get too busy like a lot of cakes.  I think Landon loved it too!

I hope that 2015 brings us all much success and plenty of cakes to decorate!

Chevron Cake

We were asked to make a cake for a "Chapel talk" for GPS seniors.  The young lady that speaks at the service provides tea and snacks for all the attendees.  My clients had a very specific design that was very similar to a Charm City Cakes design.  We added a little something here and there, but I certainly give them credit for the design.

The bottom tier was six thick layers high.  The very dark teal was hard to make and probably the most challenging part of the project.  When making a super dark color, start with dark pre-colored fondant, never white.  Make sure to add some black.  If you can purchase some powdered color, it would help.  The amount of gel color you have to add makes your fondant very sticky and loose.  You will need to work powdered sugar in with the color to keep the fondant the right consistency.  For the chevron design, we made a stencil and traced the design with a scribe (a pin with a handle).  We used Nu-silver and painted on the design.  We did the same with the pink layer, but just painted the stripes with super pearl luster.

 

For the total silver baby tier, we painted it instead of airbrushed. To remove the brush strokes, just go over with a soft brush in a circular motion using a little more dust. For the silver dots we trimmed off the tip of a stiff paint brush so it was a dot stamp more or less.  We had to do more than stamp it, but it got the job done.  The peonies were purchased at Wholesale Sugar Flowers.  Last but not least, the pretty backdrop is from Ink and Elm.  I love their backdrops!

Workout Weights Groom's Cake

This workout inspired groom's cake was finally a chance to do a little something different!  The actual working out does not interest me in the least, but a cake about it? Heck yeah!

There are a few things that I still can't do well and spheres is one of them.  I try and try, but they come out "wonky" in shape and the fondant coverings are terrible.  What I have learned is that making the bottom half of the rounds out of pre-made half spheres is the way to go.   Cake does not like being upside down so gravity is not your friend.  Dallas Foam  has all kinds of sizes and I always keep a few on hand for sphere "emergencies". 

I've really noticed this year that black fondant can fade really fast.  In a day it can go from dark black to dark gray.  My first advice is to work extra black color into it before you get going.  Someone mentioned adding baking soda or baking powder and that would help, but I can't find the actual instructions, so please let me know if you have a clue what that tip is all about!  The weights are all covered with modeling chocolate.  I did not have any problem with it fading.   The medicine ball is fondant and I had to paint it with petal dust just to get it back to black. 

 

The other "new" technique that I am trying to use is painting with cocoa butter.  I've had super bad luck using edible markers on modeling chocolate.  It totally runs when it gets condensation on it.  For the weights, I marked the letter with cutters and then painted in the lines with white cocoa butter.  You have to keep it warm as you are working, but that is the only "tricky" thing. 

I used the jump rope as a "border" to hide the yucky bottoms of the top tiers.  Also on the three weights, I wanted a "lip" but when stacking them, I had to cut away the areas that would have been squished from the tier above it.  All my technical cake talk is so complicated :)  Hope you enjoy looking and learned something from my experience.  If you have any tips on spheres or fading fondant, please share with us all in the comment section. 

A Groom's Cake Collection

What happens when a bride can't decide on ONE main thing for her Groom's special cake?  This cake happens!  We had two meetings, the second one solely to nail down only what HAD TO BE included on the groom's cake.  The only item we "lost" was changing a Lakers jersey to just using logos on the sides of the stage like cake.  Here is the list of items we had to include:

Accurate pair of Air Jordon tennis shoes in black, red or white

Air Jordon box for the shoes

Beats Audio head phones in black, red or white

Panda Express box with orange chicken

Panda Express box with Lo Mein

Pokémon ball

Lakers team name and the number 24

Guatemalan flag

Blue power ranger helmet

If you are a cake decorator, take a minute and figure out how many hours it would take you to decorate this cake from crumb coated cake to finished project.  I find it's easier to figure each element and then add it all up.  I'll tell you how long it took me at the end of the post.

Due to all of these items,  I was very worried that it was going to look terrible and like a big pile of stuff.  Luckily I was able to coordinate the colors so that helped the cohesion.  I originally planned on a 12 x 18" cake, but a 16" square base cake just looked better.  It was also supposed to be buttercream, but I added the fondant over it since everything else was covered.  We used modeling chocolate on the box because it just makes a sharper looking box.  The take out boxes and head phones were rice krispies treats.  The shoes were white chocolate pound cake.  The shoe box was pumpkin spice and 16" square  was chocolate (I think...it's been a few weeks).  She had a bit of trouble deciding on one flavor too :) 

We have talked about the takeout boxes and shoes in our previous two blog posts.  There isn't much exciting to say about the rest, I guess it's more about how it all plays together and how long it took to complete.  I've said before that I charge by the serving and then charge by the hour for extra artwork and supplies.  We aren't new or particularly slow at our job.  I am better at charging the right amount of artwork for a cake, but not this time.  We spent 44 hours decorating this cake.  I was tired for a week and mad at myself for bad planning for at least as long.  It is the nature of the beast and we have to learn more and do better with our skills in cake decorating and business.

Tennis Shoe Cake

We made a pair of Air Jordon shoes and their box as part of a larger groom's cake.  We have made two other shoe cakes.  A pair of Converse All-Star's and a pair of fancy high heels with a shoe box.  Lucky for us, the bride let us pick the shoe design, it just had to be accurate as the groom was a collector.   The easiest avenue for any 3D cake is to have the item in front of you, or at least a 3D model (like a car).  I find it so helpful for all those little things, like accurate measurements!  We picked these because they looked easy compared to all the rest of the Air Jordon line.  Shoes are notoriously deceiving so keep that in mind when you're planning.  It took us eight hours to make the pair.  Some people may think that is crazy long, but I have not figured out a way to "hurry" on a project like these.

Let me tell you what I learned/did wrong with this project.

1.  Black fondant FADES!  I added extra black food coloring when I started but I truly believe that the fondant faded just in the time it was exposed to lights.  I saw these girls on "Amazing Wedding Cakes" practically working in the dark to avoid their black from fading.  I thought they were crazy!  I'm sorry ladies, you are sane and black fondant is stupid.  MAYBE if I was doing this exact same project again, I would airbrush the shoes before adding the soles and edible images.  MAYBE that would have helped.  They really didn't fade until I had the details on and at the point the air brush ship has sailed.

2. Make paper templates of sections so that all sides are exactly the same.  For example the side squares with the dots and without the dots.  I should have made all the templates and pinned them on one of the shoes before I started scoring the lines.  I wouldn't have gotten "off" had I done it that way.  Every cake has a backside!

3. CK Edible lacquer is super awesome!  The shoe had shiny parts and I sprayed some lacquer in a paint cup and used a small paint brush to apply it precisely when it was supposed to go.  Lesson here, the stuff dulls the longer it sits.  What until a couple of hours before the event to apply this if possible.  It won't go away over a day or two, it's just less shiny.

4.  Edible image paper is my friend!  Chad found a little dot pattern and printed out one page.  I used my templates to cut the pieces a tiny bit larger and then used a clad tool to bend them into the seam. 

5.  The sole is so important!  I used straight fondant for the black parts, but the red and white parts were 100% modeling chocolate.  The white part was put on as one big, thick piece and I took a ball tool and carved the lines and details in.  I should have spent much more time on the sole as the real shoe had more ridges, but I was out of time.....

6.  I have lost my ticking tool.  The one that makes it look like you have a sewn line.  I used some Wilton tool, but it just looked bad so I didn't add anymore detail with it, but once it's done you have to live with it. 

Remember to plan EIGHT hours or more and charge accordingly :)  Now I have to go and order my missing tool!

Raspberry / Blackberry / Succulent Wedding

Sometimes a bride enjoys picking out her wedding cake so much that she does it three times.  Luckily the final choice was one that I really wanted to make.   This cake is very different and "natural".  I was given the picture and asked to make a few minor adjustments like the colors on the succulents, vanilla bean specks in the fondant, and two layer had a royal icing texture that was very subtle with a bit of gray to lightly mimic river birch.  I went very light on the gray because I didn't want it to stand out and take away from the focal point.  To keep things clean and simple, I put a little bean specks in some royal icing and "caulked" the tiers together instead of any kind of a border. 

For the "Hens and Chicks" or succulents, I really didn't have the time to make them since the bride changed the design fairly close to the wedding date and I was too busy to learn and try (or maybe just tired...).  I ordered them all from "A Cake To Remember VA".  Kara was absolutely great to work with on these!  She changed the color to just a pale grey and I used petal dust to make them match the wedding colors.  She was so helpful and VERY quick in getting them to me.  If you ever need pre-made decorations, molds, supplies or great tutorials check out her Etsy store. 

We made 80 raspberries using silicone molds that I also found on Etsy. I bought six kinds of raspberry molds but I think this is the one I used the most,

We started out by using a little tool and making the natural indentation on the top but then there wasn't enough to poke my wire into!  So no hole!  Ron Ben-Israel would not be proud of me :)
The most realistic raspberry mold that I purchased was this one. 

The reason I didn't use it is because it is impossible to get the berry out without distortion unless you use a material that will get hard in the freezer, like Fondarific or modeling chocolate.  I did not have time to do that 80 times!  If you are making five, cool, but not 80!

The "blackberries" that were "purpleberries" to match the wedding colors were much more challenging even though there was only ten!  They are not hard, just require some patience.  Make a grape size piece of gumpaste/fondant mixture, dip your wire in tylose glue and insert.  Let these sit up a few hours.  Now make a TON of tiny, varied sized, balls and let the dry.  When you are ready to make them, make a few fresh balls so they will squish and make a more natural look overall.  paint the "grape" with tylose glue and stick all the balls on it.  I tried rolling it and that will just get you a few and then fill in all the spaces.  Poof!  You have a blackberry!  I enlisted my friends to help me and it took four of us 90 minutes to roll all of the tiny balls.   That's six hours!   I was glad there was only a few!

If anyone knows the original artist for this cake, please list them in the comments.  I would love to give them credit for the beautiful design!  Now go cover a cake with summer berries! 


TIEREDCAKER GIVEAWAY WINNERS!

OK folks, we a A LOT of people register to win the Tiered Caker app giveaway.  I can tell that there's lots of interest in the product.  Special thanks to Calculated Cakes for sponsoring the prizes.  Chaddy put all the comments into the randomizer and picked out 2 names:

I have heard from Thelma already, but we are still waiting to hear back from Judith.  Once we have proper contact info from both we will get the information sent to Calculated cakes for your prize!  Congratulations!

Bar Mitzvah Tennis Cake

This week I want to tell you about the Bar Mitzvah cake I made to go with last weeks Bat Mitzvah cake. What a big party these twins had! Huge decorations, beautiful lighting and great food all at The Chattanoogan Hotel. They had to have wonderful cakes to match the event. When I met the clients, the birthday girl knew she wanted a giant fancy cake. On the other hand, the young man was so easy going that it made a problem. He wanted a sheet cake with a score board, that was all. I suggested some options to make it more grand to be on scale with the girl's cake, but he wasn't having it. Long story short, the parents almost didn't book the cake because they didn't want to spend so much on a "sheet cake". I had sketched out a 3 layer rectangle tennis court (not exactly a sheet cake!), with bleachers on two sides and a scoreboard on one of the long sides. When I found out about their reservations, I decided to sketch out a whole new design concentrating on what would match the size/scale of the girl's cake and not limit myself to the original instructions. Everyone was happy! Then all I had to do was make the cakes....

The cake itself was not hard, just very large. I used a half sphere of styrofoam for the bottom of the ball cake. The darned thing still wasn't perfectly round. I didn't trim enough off the cake half so the middle was too long. I'm not sure if there is a way to check the exact roundness of the cake other than just eyeballing it. Anyone have ideas? We used strips of plain edible image paper for the lines on the court. I really like the look and the flatness of these kinds of lines on a field. I've done it with thin fondant "snakes", but they aren't as pretty. The rest of the cake was pretty plain so I added a few details like tennis balls.

There are things I'm very good at and things that I'm just not. I've still got a lot to learn on a several things, but especially making fondant figures/people. The birthday boy wanted a figure to look like him and one to look like Roger Federer. I should have started those crazy things two weeks earlier, but it did not go down like that. Have you noticed yet that there are no pictures of these figures? Well, I wasn't happy with them so there is no evidence! I have two pieces of advice, because I'm soooo awesome at making people! First, use good modeling chocolate. If it's too soft or on the other end of the spectrum, to cracky, make a fresh batch! Second, watch Artisan Cake Company, AKA Liz Marek, on You Tube. Her fondant figure tutorials are the best that I found! She is awesome! But remember, she makes it looks much easier than it is, at least for me!

Taking Care of Display Cakes

This post is a baby lesson in dummy cakes and how to repair them. I really liked this cake when I made it, but about a year later it had a little accident. I was storing/displaying it on a silver cake stand on top of a refrigerator. Next to the refrigerator was a cooling rack on wheels. One day I moved the rack and the stand was apparently being held by the rack because it the cake went flying across the room! My first hint is to put little pieces of shelf liner under each each foot or the entire stand. Every time you open the fridge, the cake stands moves a little bit so avoid the problem with shelf liner!

I use to cover cake dummies with piping gel to attach the fondant securely. My cake friend Kimberly told me to use Crisco to attach the fondant. When you are done with the display cake, you can soak it in hot water and reuse the styrofoam dummy! That is tip two! Since I had used Crisco, when the cake hit the ground, the fondant completely came off the top tier. Totally gone! Naked! There was also a big hunk out of the deer tier.

The cake was in good shape before the accident, so instead of trashing it, I decided to do some fixing! I recovered the top tier and then added the ruffles. I think I have to make an entire ruffle cake soon! I was going to leave it, but then I felt like I needed more height so I added the topper. Just some gumpaste and a bit of floral wire.

For the deer tier, I measured the thickness of the fondant still on the cake and rolled some fresh fondant. I cut a nice straight line for the bottom and then pressed it up against the cake. Basically this made an impression on the fresh fondant so I knew where to cut the patch piece. It then fit right in. I just blended it with my finger and it really wasn't noticeable. I added a few ruffles to hide some imperfections as well as some gumpaste flowers, pinecones and berries for a more wintery feel. Hide those boo boos with flowers!

Next tip, when adding flowers or something to a very hard display cake, you can add a good size piece of fresh fondant and attach it with gum glue or water. This will give you something to poke in to and hold your new additions. It this isn't feasible, because you can't hide the big piece of fondant, use a drill with a small bit to pre drill holes. You may have to use a really small bit first and work up to a bigger size. That will give you a nice hole to poke flowers into.

I am glad that I loved on the cake instead of trashing it because I think I like it better now. Maybe I was just tired of it :) My last tip is for dusting old cakes. If the cake is very dusty, take it outside and use a hair dryer on cool, an airbrush, or just a clean large paint brush and dust off the big part of the dust. If you just have a little dust left, use a clean paper towel soaked with PGA or vodka and wipe it down. If this doesn't get it clean enough, use a very clean dish rag that is wet but rung out well. Wipe off all the dirt or discoloration that you can't this way. It will make the cake gooey because of the water, but it will dry out and your display will look much better!

Peony Curl Wedding

This past weekend I delivered this beautiful wedding cake to the The Mill in Chattanooga.  I have made a cake similar to this one a long time ago, but the bride brought in a photo of a cake she likes.  The petals on the tiers were curlier and a little less sparse than the one I did previously.  I knew that making the cake wouldn't be a problem. what I was really interested in was making those beautiful sugar peonies.


I have confessed on numerous occasions that I normally buy my sugar flowers.  But the peonies the bride wanted were extra full and  pretty and she also wanted a blingy rhinestone center.  Well, I could find anything like that online, so I set out to make my own.

I used gumpaste with a little fondant mixed in so I could get a little extra work time and so I could get those petals really REALLY thin.  They took longer to make than I expected, but I think that the extra time was worth it, don't you?

Well, it's almost Christmas time, are there any cake goodies you hope that Santa brings you this year?  If so, let me know what it is in the comments!

Buzzy Bee Birthday Cake

It's been a while since I have done a birthday cake, but when I got a call from a previous client recently with a request for her daughter's 1st birthday I just couldn't say no.  I based my design on a napkin the client provided me.

I know that most people don't like fondant (especially one-year olds) so I did most of the cake in buttercream using only fondant for the beehive and the cake's accents.

I really enjoyed making the bees the most.  I used stamens for their little antennae and used my wafer paper again to make their little wings.  I just thought they were SO cute!

Wrigley Field Marquee Cake

I made this cake recently for our good friend John.  He is the host of our weekly trivia tournament, and an all-around super great guy. When we found out his birthday was coming up, one of the guys on another trivia team told us what a big fan John was of the Chicago Cubs.  Paul was the one that suggested the Wrigley Field marquee.  Chaddy and I aren't sports people at all, but once I saw the marquee, I knew we could knock it out of the park!  That's a sports saying, right?!? :-)

Chaddy went to work on the graphics, and determined really quickly that it would fit just right on a 12x18 cake.  He then cut the letters out with the Cricut, found a font and printed out the "LCD panel", and printed out a life-sized template.  I used the template to carve the top of the marquee, and to place the letters on the cake.  I extruded a small square rope for the edges of the marquee.  I made small pin holes in my template to help me place the letters and the lines.

After that, I thought the cake still needed a little something, so I put a small Cubs ribbon as a cake border (also an edible image).

And for the record, John was really stoked about his cake!

Stag Head Woodland Wedding

Click to Enlarge

I made this dummy cake recently for a bridal show.  My goal was to make a very elegant cake, but I also wanted to give it a really rustic feel, since those seem to be all the rage these days.

My inspiration for this cake was a necklace a friend got a while back on Etsy.  I borrowed it from her and Chaddy used it to make a cut file for the Cricut.  From there I took the 2 half height tiers and used an impression mat to give them a good wood graining.  I know it's hard to tell from the photo, but if you click on it to enlarge it, you should be able to see it better.

For the borders, I used some leftover rhinestones for a punch of bling on the wood grained tiers and I used a twig mold on the plain tiers.  When I was finished I really liked the monochromatic look.  The cake got a lot of response when it debuted at the Chattanoogan's Wedding Showcase.

Have your signed up for our Craftsy giveaway yet?  This is the last week to register to win Mike McCarey's Advanced Sculpting Class; don't miss out on your chance for free cake training!!  Click here to see the post!!

Emerald, the Pantone Color of 2013!

I suppose they have a "color of the year" every year, but this time was the first I noticed it being mentioned everywhere.  EMERALD, so pretty, so dark, so beautiful and not so easy to color fondant in the right shade.  We are no dummies, we started with Satin Ice Green, but then added lots of "forest green" to get the color were we wanted it.  This cake is somewhat plain, but busy in the "texture" department.  I used a mold for the band borders because I'm tired of plain ribbon :(  The star of the show is clearly the bows.  I know bows are also getting old and tiresome, but I think this is a little different since it's on it's side.  The trick to this bow (a 50/50 mix) was to make the loops (three different sizes) and then before they get hard, start attaching them.  You have to have a little flexibility.

What colors have you been digging lately??

Kaben's Birthday Hoedown

Recently I did Kaben's 4th birthday cake.  I have mentioned Kaben here on the blog a few times before, since I have done all of his birthday cakes.  He is such an amazing little boy, and he always gives us such great ideas for his party cake.  This year's party theme involved a petting zoo, cowboy hats, cactus balloon sculptures - certainly enough for me to create a cake around.  It all worked so well at The Car Barn!

Our cake starts out with the bottom cake tier as a wooden crate covered with modeling chocolate "wooden" panels.  We also made his name using wood planks also made from modeling chocolate.  We used a Wilton #3 tip to make mail holes in the planks.

The next tier was covered in blue fondant and made to look like denim blue jeans complete with little pockets and stitching.  We also made a horseshoe inspired 4 made from gumpaste for rigidity.

The next tier was a bandanna in John Deere yellow and green. I gathered the fondant a little and finished the tier with a little fondant knot.

The next tier was inspired by the petting zoo.  Just a green fondant "hill" with a rickety country fence.  There were a few animals made from modeling chocolate poking their cute little head through.

Cars is still Kaben's favorite cartoon, so we incorporated one of the tractor "cows" into the cake as a topper. I used some pictures from the Internet to sculpt a tractor from modeling chocolate.  Now Kaben also wanted his tractor to "moo" just like on the cartoon.  He was too high on the cake for Kaben to reach, so we used a recordable sound module and incorporated it into a tractor tire on the cake board.  Now my frequent readers here will know that this is totally Chad's area of expertise.  He took the module into the office and about 2 minutes later he came back with with the sounds on it.  I thought he had pulled up some sound database on the Internet to record it from.  It wasn't until the next day that he told me he just mooed into it.  I couldn't believe it, but it sounded great!  I guess if this cake thing doesn't work out, he has a career as a cow impersonator!  LOL!!

Thanks for stopping by and reading my little old blog.  I know this was long, so here's a closeup of that tractor sculpture as a special bonus for sticking around!