Golden Inspiration Wedding Cake

Edible sequins are one of the new big trends in cake design, at least with Chattanooga wedding cakes  We shared one a few weeks ago that had "large" sequins but now we have one with tiny sequins.  I'm just going to say it, I used A LOT of gold! But it's SO pretty! We baked and iced a 6/8/10/12" combination in all buttercream.  We created the lines with a little pairing knife dipped in warm water every few minutes.  The borders were fondant and the sequins were colored quinns painted gold.

 

You can get a five pound container at Pfeil and  Holing.  Don't kid yourself, 5 pounds is a big container; it should last you a while!

We bought a bunch of these flowers to make the cake more economical for the bride.  As usual, my favorite flowers are the big pretty garden roses from Cal-Java.  They are SO big and pretty and they really popped against those gold sequins!  I hope you get a little bit of golden inspiration from this pretty cake!

Rose Column Wedding Cake

We made a cake recently that the bride wanted the top tier to float on top of flowers. That's a nice way of saying that she wanted a 2" space in between the tiers. In the olden days, seeing white plastic columns was expected, but today it's considered tacky or old fashioned. I have found that the "hidden pillar" system from Wilton is great for this application (only one or two tier separated at the most.). You will need to buy a plastic plate that has stubs on the underside. I hot glue my cake board to the plastic board and flip the cake upside to cover the plastic edge with buttercream. In almost all instances, you want to use a ribbon border to hide the Union of the two boards.

You can still see the columns here

The next teams you need is a set of "hidden pillars". After you put one in you can measure the height of the space you will need. Mark it, remove it and cut the rest all the same height. Learn from me, if your cake is less than 8" in size, install all the pillars BEFORE you decorate the cake. They are so big and can displace so much cake that you might have a blowout. We had that happen at the venue one time. The cake was completely covered in piping and it was hard to fix. Lesson learned.

Extra petals will make the columns disappear

A few more helpful hints for these types of cakes. To transfer the cake that is hot glued to the plate, before you add the cake find a piece of styrofoam (a 1" tall disc that is a couple inches bigger than the cake) works well. Make sure you have plenty of flowers and preferably different sizes. This cake had over two dozen roses. Install all or most of the flowers before you put the next tier on. Also before you install that tier, glue (with buttercream) a few rose petals to the plastic pillars. You have to sacrifice a rose but I means that none of the plastic will be seen. After you install your next tier, you will need use some of those sacrificial petals to fill in black holes. Just fold them and insert them or put on top of flowers to make them bigger. You can really see the difference in the pictures where I've added extra petals.

As an added bonus here is a topper tip. If you need a toppers stub to be longer (always when they are 1" long) then floral tape some skewers to them. It will make it more secure. If you have long stubs but need the topper to NOT sink down (like this one that needs to float above the flowers) we hid a straw under the topper and then his it with flower petals glued with buttercream to a straw. Ha! I'm a wizard!

Pleated Fondant Wedding Cake

We have done a few cakes like this, but I do have a little advice and "new thoughts" on the technique of the pleated fondant.  I've noticed on some of the FB cake groups I'm in that a lot of people ask how to do this look.  Many people are doing a version of it by cutting several angled pieces of fondant and layering them on top of each other.  It's a much flatter look.   There is nothing wrong with that version, but it's not the same as trying to make the fondant look like pleated fabric.  If you are brought a picture like this cake but don't make it the same way, out of one piece of fondant, the look will be very different.  BEFORE you sign a contract saying you will do it , try it on a cake dummy so that you can prove to the bride and yourself that you can get the same look.   If you are a customer and you aren't SURE your baker can do something, offer to pay for a small trial run, like a top tier size. 

This cake was made using 3" styrofoam  cake dummies in between the tiers.  I painted all the flowers with an airbrush ahead of arranging them.  The flowers we stuck in if they had wire, but most were "glued" in place with royal icing.  My advice here is use as many different size flowers as you can so that you don't have blank spaces.  I  have been known to make a few roses petals and squeeze them in when the are soft so it looks very full.  We also airbrushed the dickens out of this cake when it was all stacked and ready to go!  My bride wanted a pearl finish so she got it!

Anytime you have a tier of cake floating above flowers you have to deal with hiding the edges of the cake boards.  For me, ribbon is the answer because it is not heavy and you can pull it tight so it doesn't sag.  Buttercream borders can fall off due to gravity, as can fondant pearl borders if they are large.  Have you ever noticed that when the bakers in Europe make this type of cake, they still have a larger cake board under each tier?  So a 6" cake would have an 8" cake board, then a 10" cake and 12" board, etc.   I don't like the look myself, but it sure would be easier! 

                                                  

*I owe you a close up picture.  I accidently deleted it :(

Ruffle Ribbon Rose Tutorial

Lots of people have made a cake like this, but I'm going to give you a few little instructions and hints. Let's call it a tiny tutorial!

You need a few things: a ribbon cutter ( or not if you want to take 4 times as long), a poking tool (something with a dull end-aka not pointy), and a small knife. I used a gumpaste and Fondarific combination. I love the extra working time that the Fondarific gives me. Now a pasta machine is great! But if you are going to make one of these, don't make the investment.

I rolled the fondant pretty thin and in long pieces. A #4 on the pasta machine. Using my ribbon cutter with a 1-1/2" space, I cut as many strips as I could. I used plenty of cornstarch on the bottom and top of the strips. I then folded the strips in half longways with a slight crease. I then rolled up the strips in nice little pinwheels. Then store them in a ziplock bag until you have a bunch and are ready to put them on the cake.

 

I used a large circle cutter to mark all the "roses" that I was going to need. Then starting on the outside I started applying to the cake using the little tool to slightly adhere it to the cake. I was working on a buttercream cake that does not crust, so it went right on and stayed. You may need to apply gum glue or piping gel to make things stick.

I went back to the strip I just applied and poked it further so it would be more secure and fluffed it at the same time. Now keep going and going......

Once all the roses were done , I started added the fill in pieces. I developed more of a system the longer I did it. I put as long of a strip as you can handle. Having them in rolls helps you handle lots of the material at one time. When I got to the smaller pieces, it was best to make a zig zag Christmas tree sort of thin and then fitting it in the hole. Then go back and attach and fluff.

Lastly, I did use some very small pieces of foam to keep any very tight or heavy areas up and to keep them from being all flat. This was really important on the top of the cake when everything was laying so flat. This was a 12" round cake and it took me about 7 hours to get all the ruffles finished. Please be sure to charge accordingly.

Ruffle Ribbon Rose Wedding

We were asked to recreate an almost exact copy of a cake from the Pastry Studio.  I have been getting involved with some more FB groups and noticed people saying that you should ask permission before recreating a design that you copy.  I guess in a perfect world with lots of time and super polite people that may happen, but this is not that world.  I'm not going to lie and say that I ask other cake people, wrapping paper designers, or invitation designers for their permission when I draw inspiration from their designs.  I have friends that say they WILL NOT recreate another person's cake or even their own.  I have tried many times to sway a bride to my design but many times they are insistent on a certain cake with NO changes. 

I try to alter it but I can only push so much.  I don't want to lose the sale!  I would if I told them "No, you can't have what you love and dream of."  Does that mean I am an awful thief? I just can't accept that.  If you put your work out there to inspire brides and decorators, you shouldn't be mad when they want it.  I see copies of my stuff all the time, especially in my local area.  What I hate is when a local competitor knows your price for your cake and tries to undercut you to get the order, but that's a whole other topic.  I make sure to verbalize and have in my contract that my work will differ from another baker even when I'm trying to be exact.  I still feel guilty about using someone else's design and I won't be using these types of cakes on my new updated website in the future.

Please weigh in and feel free to tell me your thoughts on the matter.  We can have varying opinions and still be friends, right?

Sweet Sixteen Birthday Cake

This past weekend I made the cutest sweet sixteen for a young woman in Chattanooga.  I worked closely with her Mom to get a list of all her favorite things so we could surprise her with this grand birthday cake!

Our birthday girl is on the rowing team, so I made a replica of her rowboat in her school's colors.  The rest of her cake followed a salmon and turquoise color scheme.  Does anyone besides me have a problem mentioning salmon and cake in the same sentence? ;-)

I made her favorite shopping bag, and even a set of car keys, something every s16 year-old wants, but I had the most trouble with the birthday girls' pup!  I initially starting molding the dog using Fondarific modeling chocolate, but I had to scrap it.  It was just a little too wilty and wouldn't hold its shape the way I wanted.  I made a quick batch of real modeling chocolate and that worked much better. 

Thanks to everyone that stops and reads my blog; I enjoy telling you my tales in the cake trenches.  Friday is Valentine's Day, so hug someone you love!!

Beautiful Roses Can Make the Cake

We delivered a wedding cake to Lindsay Street Hall in Chattanooga this weekend.  It was one of those simple pearl dotted wedding cakes.  I've done many like it before.  In fact, before leaving the shop I didn't even take a picture of it.  I just had to drop it off at the venue and put some fresh flowers on it.

When I got to Lindsay Street Hall I found the flowers that the florist had left for me.  Before I could even remove them from the container I couldn't help but notice that these were the largest, most beautiful pink and peach colored roses I had ever seen!  As I started putting these gigantic roses on the cake I began to really fall in love with it.  I checked the label on the container and saw that Humphreys Flowers had provided the florals.  I don't know the names of these roses YET!, but I will be speaking with someone from Humphreys soon to find out more about them!

It just goes to show that sometimes you can take something perfectly elegant and with just a simple addition turn it into something spectacular.

Buttercream Comb Cake and Comb Tutorial

 You guys know that I'm all about some buttercream cakes and when I can duplicate a fondant design in buttercream, well I'm just about the happiest girl on the block!

I made this dummy cake a few weeks ago (so this is actually royal icing, but it still works with the good stuff) and I wanted it to have the look of fondant strips.  It took me a while studying a few I found online in order to figure out just how I needed to make my "grooves" to give me the exact shape I needed.  Then on my first pass I used it upside down!  But it still looked neat, so I realized that I got two looks from the same comb.

So How Do You Make It?

Well, I had several freebie plastic bowl scrapers that I picked up at a food show a few years ago.  They are flexible, but still still sturdy enough to mold buttercream.  At the time of this writing I haven't found a source for you to get these, but I will keep looking and update the post if/when I find some.  UPDATE:  Amazon has this for about a buck each - looks like it would work.

From there I just used a T-Square to cut the side straight (the bowl scraper was originally very curved) and used a ruler to measure each of the indentations on the comb.  Then I used a Sharpie and my ruler to complete the cuts.

The possibilities of this technique are only limited by your imagination.  You could do waves, or even something like dental molding, just keep in mind that you want your design to remain fairly shallow, as we are taking away buttercream, and there's still cake underneath that really needs that buttercream.

What design would you make if you made your own buttercream comb?

FULL DISCLOSURE:  As a member of the Amazon Affiliate program, I receive a small commission if you buy a product from the links on my blog.  I actually own the products I recommend and all thoughts and opinions are my own. 

Khaki Wedding Cake in Trenton

This past weekend I made this wedding cake for a sweet couple getting married in Trenton, GA.  This couple was a little older than my average wedding couple, but they were super nice and allowed me a little leeway with their cake for the big day!

Our color scheme for this wedding was khaki, white, and gold.  White is an easy color to bring to the party; here we used white in the borders, piping, and in the roses I got from wholesalesugarflowers.com.  A little gold goes a long way on a wedding cake and can be easily overdone.  I used a cosmetic sponge to lightly edge each of the roses with gold luster dust.

I had a rough time getting the right color combination to get that perfect khaki color.  Khaki is WAY different than ivory.  My final recipe included mixing in brown, green, and just a smidge of purple coloring into my white buttercream.

Burlap Pattern & Rose Wedding Cake

Some of our brides discover a cake online, bring in the picture and want nothing changed.  This cake was one of those projects.  I wish we could credit the original designer, but we don't have the name at this time.  The venue for this cake was a barn with lots of rustic decor, burlap table cloths and a very elegant bride.  The imprint on the fondant was to look like a burlap pattern. I found a great clay pattern mat for clay that had a sort of wavy pattern but the "thread" was too thin.  I could not find a burlap rolling pin anywhere!  So what was I to do?  I used a large piece of rubber shelf liner that I use for non slip mats under all my cakes.  It worked great but wasn't "natural" enough until the pattern got "distorted" while covering the cakes.

The pleating did not come naturally since we are all conditioned to not have pleats, but as you can imagine it wasn't had.  I don't have room for a huge fondant sheeter, so I've found a GREAT alternative, "The Mat".  I think that tool and Elite fondant are the key to covering cakes.  We use many different brands of fondant for many different applications, but Elite is by far my favorite for covering cakes.  

This picture better shows the burlap pattern

I used two boxes of "Bloomed Garden Roses" from Caljavaonline.com as well as several smaller roses for "filler".  I really love these roses because they come with four sizes and are very natural looking.   The biggest challenge were trying to get the flowers to "match" for ivory fondant (straight from the tub ivory).  I ordered them in ivory but they were very peach!  I spent 5 hours airbrushing coats and coats of petal dust to get the color right.  The bride wanted the entire cake and flowers to have luster dust airbrushed on also.

My real challenge on this cake was self inflicted.  I keep letting brides pick their favorite cake stand regardless of the diameter of the cake.  As you can see on the first picture, there wasn't a very big lip on the cake board.  You really need a cake board at least 6" larger than the bottom tier, or the cake will be too top heavy and more likely to fall. When you are traveling with these tall guys the extra cake board act like "training wheels" so that it doesn't fall over.  When we have done this in the past, we still put a larger board so that we can carry it and not put our fingers in the sides.  This doesn't give you close to the stability, so don't use that as a solution.  I'm not going to keep making that mistake!

Wedding Cakes in Rustic Locales

At least in my area, barn weddings seem to have become very popular.  Maybe the rustic setting is coming back in style, or maybe it's easier on the budget, but I am delivering more cakes to these rustic locales than ever before.  I delivered this cake just this weekend to the barn at High Point Farms.  This design was based on a cake the bride found on The Knot, and I thought it worked very well in the rustic setting.

There are some things you have to be aware if you're planning on having or making a cake for a barn wedding.  There are many types of "barns" - some are nicer than your house; some don't have fully formed walls.  See the light coming through in the background of the photo?  That's sunlight from the outside world.  If you don't specifically know the barn, you should treat it like you would an outside cake.  I recommended fondant for this cake and I'm so glad I did.  When we arrived the barn was cool enough, but it had sawdust / wood shaving floors.  Every time we stepped, you could see sawdust floating through the air.  If I had delivered a buttercream cake, those guests would have had extra fiber in their dessert for sure!

Now for this cake... It was a 3-tier fondant cake, with a rose stencil on the bottom tier, and an extruded rope wrap on the top tier.  The flowers are gumpaste ranunculus in the bride's colors.  The toppers are small corn husk dolls that were made for the bride and groom.

As always, thanks for stopping by and have a great week! 

Garden Rose Wedding with West Point Grooms

I delivered this bride and groom combo to Lindsay Street Hall a few weeks ago.  It is such a beautiful venue, and these cakes fit in just fine.

The bride wanted a very simple, elegant buttercream cake, with no borders.  Getting that nice crisp edge without any borders may have been the hardest part of this cake!  She also wanted roses, but she wanted to incorporate the green color she was using in her wedding.  I bought some of the Garden Rose Collection roses from CalJava.  I think these are some of the prettiest roses I have gotten.  I dusested them with a small hint of green, which really gave them an antique china look.  That and a few green leaves pulled in her colors nicely.

Lastly, I thought it needed a woodsy element, but I didn't have any curly willow, so I made my own!  I took 3 pieces of wire, wrapped with floral tape, and then coated in chocolate.  It made a nice "twig" and saved me a trip to the store!

Our groom's cake was for a graduate of West Point Academy.  Here we relied heavily on edible images, but I initially thought I was going to make the crest 3D.  Sometimes things just work out that way!

I used fondant in a chocolate mold to make the eagles and then painted them gold with luster dust.  I then used my extruder to make a red and blue border in keeping with the patriotic theme.

Lastly... are any of you members at CakesDecor.com?  It's a very nice place where cake decorators can come together to share cakes, ideas, and information.  I have been visiting there for a couple of months now.  It's a great resource and everyone there maintains a very positive attitude.  Well they interviewed me last week and they'll be featuring it on Thursday.  So stop by on Thursday and check it out!
   

Rose Stencil Wedding Cake

This weekend we delivered another wedding cake to The Grandview on Lookout Mountain.  And this wedding cake was all about roses.  It's hard to tell in this photo (I have a better picture below), but I used my rose petal stencil on the sides of this cake.  And then each tier had a layer of roses in between with a nice little bouquet on top.  It seems like most of the cakes I take to the Grandview are all cakes I have to put together at the venue!

I'm not sure how other decorators carry cakes that have to be assembled at the venue, but it has always been a problem for me.  I decorate the cakes on the column plates, but I'm always a little afraid of traveling with them on these plates.  The day before the delivery it came to me!  I could just put the separator plates on a styrofoam dummy and carry it that way.

As you can see above, I used an extra plate to make the indentations on my foam dummy. I actually had to use a small knife to dig out some of the extra foam, but I still wanted the separator plate to fit tightly.  Then I just sat my cake into the foam block and popped it into a bakery box.  It was super stable and traveled very well.  If you click on the picture you can also see the detail on the rose stencil.

Chocolate Groom's Cake with Antlers

I have to admit that anytime I start hearing the term "antlers" discussed in a cake meeting, I tend to get a little nervous.  There's just so many ways you can go wrong with antlers.  I definitely like the rustic look, but I guess antlers just freak me out a little.  I guess it's that they come from little baby deer (OK, so I know that "little baby deer" don't have antlers, but they do in my mind!)

I delivered this cake to The Farm in Dalton and when I brought it in it was just a plain chocolate cake.  The florist took over while I was putting together the ginormous wedding cake and when I finally looked over this is what he had done!  I really thought it looked amazing.  The moss near the stump base, the roses, even the pheasant feathers looked great.  And the antlers even looked pretty cool around the base, although I was still a little iffy on the on on top of the cake.  Is there such a thing as artificial antlers?  Is there something you can coat them with or do to them that makes them food safe?  Boil them maybe?

Have a great weekend, and be sure to stop back in next week as we have a really great cake to showcase on Tuesday and a tutorial for you on Friday that you're just going to love!

Wedding Cake Jewelry

It seems as thought this season's most popular wedding cake is similar to this cake here.  An elegant scroll pattern with rose separators.

Most of the time I want the florist to do the flowers on the cake.  I have done some basic floral arrangements in the past, but florists make sure that the flowers are pesticide free - things I know nothing about!  This time around, the florist had other commitments, so I agreed to place the flowers on the cake. They left me 2 huge buckets of roses and I used every one I could between those layers!  LOL!

Also, the bride provided me with those teardrop crystals to go on the cake.  Aren't they beautiful?!?  I have to find out where she got them.  These pictures just don't do them justice. They were so sparkly, they really did look like diamonds.  I just thought they were perfect and added a lot of personality to the cake!

Thanks for stopping by and y'all have a great week!

Scrolls and Red Rose Wedding Cake

The lesson with this cake you ask? Bring a tool box/repair kit on every cake delivery. I didn't have any cake tragedies here, but I did need several things. First, I had to cut all the flowers and install them on the cake. Then I needed my sticky roller to clean up some of the mess I made on the table. Then I needed a Shout wipe to clean a little buttercream off the table cloth. Lastly, I had to use green floral tape and skewers and rig all the letters so they would sit up above the roses. The small stake in the plastic letters was barely big enough to hold them if you stabbed them directly into the cake, much less towering 4" over. I'm just saying, make a tool kit so you can grab it on your way out the door. Always keep a little of the cakes icing in a bag in cake of a larger tragedy. Last lesson for the day, wrap your ribbon around twice so that it doesn't get soaked with fat from the icing (then secure with a corsage pin). Happy caking!